Iconix unveils HD POV camera, controller

At NAB2006, Iconix unveiled its new 2.3oz HD-RH1 high-definition point-of-view camera head and camera control unit.

The multiformat HD camera supports 720p at 24Hz, 25Hz, 30Hz, 50Hz and 60Hz; 1080i at 50Hz and 60Hz; and 1080p at 24Hz, 25Hz, 30Hz, 50Hz and 60Hz. The camera uses three 1/3in 16:9 CCDs and 14-bit quantization to deliver a sensitivity of F8 at 2000 lux. Signal to noise is less than 60dB. The camera offers programmable gamma function. It is genlockable and can be remotely controlled.

Outputs include RGB/YPbPr and HD-SDI. Two single link 4:2:2 or dual link 4:4:4 or dual link 4:2:2 outputs are available. Inputs include gunlock, tri-level sync, RS-232 and DSUB-9.

The camera control unit weighs 2.6lbs and is 8.4in wide, 1.78in high, and 12in deep. It can be positioned up to 30ft from the camera head.

For more information visit www.iconixvideo.com.

Back to the top