Timing issues
Timing issues
Dear Mr. Robin:
I work for the regional TV station in Yugoslavia. We have been almost completely analog for the last 12 years and have no real experience in digital equipment. Now we have some secondhand digital equipment, and we are trying to combine it with what we already have. What we have now is a Philips production switcher with component inputs for cameras, and other inputs are SDI. The trouble is that we have only two SDI sources: DVCPRO and a frame synchronizer. So we're going to put an analog switcher before that synchronizer in order to have more sources available. At the end we have DigiMix as a keyer.
-
What we want to know is the method of measuring all these paths and doing timing, taking into consideration that all we have is some old Tektronix analog waveforms and vectorscopes.
Kresimir Vlahek
-
Michael Robin responds:
Get the TV Tech Newsletter
The professional video industry's #1 source for news, trends and product and tech information. Sign up below.
Dear Mr. Vlahek:
In response to your note, I have several suggestions. First, provide all analog and digital equipment with a common PAL color-burst reference signal.
Second, time and phase all analog sources feeding the analog production switcher to your normal PAL tolerances and check the results by switching from one source to another while monitoring the analog PAL output with a PAL vectorscope and a waveform monitor referenced to the central PAL color-burst reference.
Following these steps should be sufficient. Normally, digital production switchers with SDI inputs feature a synchronizer at every input with a tolerance window of +/- 0.5H. I am not familiar with the Philips production switcher you are using, but in all likelihood, it operates in a manner similar to other products I am familiar with.
Insofar as the analog-component camera inputs of the Philips digital production switcher are concerned, I am assuming that each set of component analog signals is digitized for further digital processing, so it would seem normal that it uses the same synchronizer circuitry as the SDI inputs. If this is the case, steps one and two should suffice.
Normally, you would want to monitor the SDI output of the switcher. To this effect, I would suggest a digital waveform monitor of the Tektronix WFM601 family, whose decoded analog GBR or Y, B-Y, R-Y outputs feed a component analog color monitor. That version would allow you to verify the integrity of the SDI signal, as well as that the resulting analog PAL signal is valid and legal.
-
I hope these suggestions are of help.
Regards,
Michael Robin
Freezeframe winners -
December Freezeframe:
What TV station lays claim to being dedicated in 1955 by then-Vice President Richard Nixon? It was also the site of the famous Nixon/Kennedy debates. It claims to be its city's first stereo broadcaster and its first DTV station.
-
Many readers thought that the answer was WBBM-TV in Chicago, which did play host to one Nixon/Kennedy debate. However, it was WRC-TV in Washington, D.C., that was dedicated by Nixon.
Winners:
Tom Weeden, WMTV/WMTV-DT
Xen Scott
John Terhar, National Geographic Channel
Pete Misisco, Fairfax Public Access
John Sullivan, WKMG
-
January Freezeframe:
Name and date this VTR. Called a “Videocorder,” it claimed “electronic editing” complete with the ability to “tape your material from other tapes, or off-the-air, or live camera and insert them into your pre-corded tapes with perfect synchronization.”
-
The following people named the VTR correctly, which was the Sony EV-320F Videocorder, however, no one guessed the correct date. The EV-320F was introduced in 1971.
Winners:
Frank De Nys, Ross Video
John Johnson, KTVQ
Andy Delle, Laser Pacific Media
Al Guajardo, NASA
Tony Trent, NASA
Ron Whittington
John Turner, Turner Engineering
-
February Freezeframe:
In what year was color television first demonstrated? The system employed three-spiral scanning disks for both the transmitter and receiver. Bonus if you can provide the lines of horizontal resolution the system was capable of.
No one guessed the correct answer. Color television was demonstrated for the first time in July of 1928 by John L. Baird in England. The system was capable of somewhere between 20 and 30 lines per frame.