BURBANK, Calif.—Matthews Studio Equipment has introduced the 33 Sliding Leg C-Stand with Grip Head and 40-inch Arm.

The new stand combines Matthews’ recognized support with a compact size that travels easily and delivers the strength and serviceability crews have come to expect.

The C-Stand fits in the trunk or hatchback of a small car, making it a practical choice for crews transporting equipment without a production vehicle. On set, its sliding leg allows adjustable leveling on stairs, curbs and uneven ground, while the nesting base lets crews position stands close together for lighting and diffusion.

Two risers extend to a maximum height of 110 inches (279.4 centimeters) and a minimum height of 46.3 inches (118 cm). The stand supports up to 22 pounds (10 kilograms) and weighs 11 pounds (5 kg) or 15 pounds (6.8 kg) with the included grip head and 40-inch arm. Its footprint measures 27.5 inches (70 cm) with a folded base of 21 inches (54 cm).

Matthews’ V-shaped brakes provide three points of contact for a solid, secure hold. Knurled, undercut baby pins on the riser and grip arm help secure attached equipment. Only available when purchasing a new C-Stand system, the arm now features a knurled Baby Pin with ¼ inch-20 tap for added mounting flexibility. The included grip head features serrated plates and mounting holes for positive locking. The system also is compatible with all ⅝-inch Baby Pins and receivers.

Built to stay in service, every component of the 33 C-Stand can be repaired or replaced in the field. When properly maintained, Matthews said, its C-Stands are designed to serve crews for decades.

The 33 Sliding Leg C-Stand with Grip Head & Arm is available individually or in two-packs, in chrome or black powder coat.

More information is available on the company’s website.

BURBANK, Calif.—Matthews Studio Equipment has made available its 40-inch Sliding Leg C-Stand 2-Pack, which delivers a pair of the company’s stands.

Setups often call for a second C-stand to hold the light, diffusion, backdrop or fill. The 2-Pack provides both in a choice of chrome or black finish. Each offers Matthews’ patented sliding-leg design that enables quick, adjustable leveling on stairs, curbs and uneven ground with no extra hardware, the company said.

Each stand reaches a maximum height of 127 inches (321 centimeters), a minimum height of 53.25 inches (135 cm) and carries a load capacity of 22 pounds (10 kilograms), while weighing 16 pounds (7.2 kg). With a footprint of 27.5 inches (70 cm), each stand folds down to a 21-inch (54 cm) base.

Each stand comes with a Matthews 40-inch Hollywood Arm (exclusive to C-stand purchases). It features a knurled baby pin with 1/4-20 tap, complete with Matthews’ safety features, which enable the attachment of any number of items in addition to booming out a fixture. It pairs well with the included 2.5-inch grip head. Also known as “gobo heads,” their serrated jaws and 3/8-inch and 5/8-inch holes ensure set-it-and-forget-it positive locking in every direction, Matthews said.

The 40-inch Sliding Leg C-Stand 2-Pack is available now in chrome with stainless-steel Hollywood Arm (SKU 999101) and black with black powder-coated Hollywood Arm (SKU 999102). Standard shipping is free in the continental U.S.

More information is available on the Matthews website.

BURBANK, Calif.—Matthews, a global provider of grip gear for professional media production, has introduced the Monitor Stand III, the latest evolution of the company's trusted rolling monitor support.

To benefit today’s on-set workflow, Monitor Stand III adds straight-tracking, dual-locking casters that glide seamlessly across any set, with V-shaped brakes that lock in at three points of contact, so the rig stays put exactly where it's placed. A new tough black forge-texture finish adds durability and a premium look.

The stand can be paired with the optional bolt-on Battery Tray to place a battery at the base, freeing up the risers to support monitors and other equipment above.

The Monitor Stand III features a new black forge-texture finish, along with reinforced braces and an integrated carry handle. A 1/4-"-20 tapped baby pin provides an extra mounting point for flags and accessories, while an ultra-low 5.5"/14cm base height allows the stand to slide under furniture. A Rocky Mountain leveling leg is included to handle uneven surfaces, and the stand offers a 70-lb/31.75kg weight capacity supported by straight-tracking casters and 3-point V-brakes.

The Monitor Stand III has a minimum loading height of 31 inches (78 centimeters) and a maximum loading height of 69 inches (175 cm), with a base height of 5.5 inches (14 cm). It weighs 20 pounds (9 kilograms), carries a capacity of 70 lbs. (32 kg), and incorporates a 1/4"-20 thread.

The stand is fully serviceable, made entirely of nuts and bolts with replacement parts available from the company's Burbank factory.

The Monitor Stand III (SKU 249574) is available now. The optional Battery Tray (SKU 861837) and Battery Tray with Jr Pin (SKU 861836) are also shipping.

BURBANK, Calif.—Matthews will introduce the 5-inch Pocket C-Stand with a ¼”-20 adapter for tabletop work, photographic, stop motion and miniature applications at the 2025 NAB Show in Las Vegas, April 5-9.

The sturdy, compact 5-inch Pocket C-Stand offers all of the key features of its full-sized counterpart in a scaled-down, functional package. Its height range is adjustable from 6 to 18 inches. Designed with a rugged steel build, the stand includes a double riser and a folding leg for enhanced stability and flexibility, the company said.

Available with a black powder coat, which is packaged separately for the first time, or as a chrome version, the stand is equipped with larger, easy-to-use knobs with the Matthews “M” logo. A detachable ¼”-20 screw designed for mounting small cameras, cell phone holders or other accessories makes the stand handy to use, it said.

For precise control, Pocket C-Stands feature two fully functional aluminum grip heads, equipped with 3/16-inch holes, well-suited to standard dot and finger flags or scrims. The ¼”-20 threaded adapter and 3/16-inch receiver allow easy mounting of small cameras, lights and other small set accessories. A flow spot on the 3/16-inch mounting surface prevents mounted items from rolling, it said.

The Pocket C-Stand, priced at $105, like the company’s family of C-Stands and line of grip gear is available via the company’s worldwide dealer network.

Matthews will be in N2031 in the North Hall of the LVCC.

More information is available on the company’s website.

BURBANK, Calif.—Matthews Studio Equipment has put its own spin on the wheel, unveiling the Rock n’ Roller wheel sets to make production equipment mobile even on difficult surfaces.

Designed using input from industry professionals, the Rock n’ Roll wheel set is an add-on that features three foam semi-pneumatic tires 3-inches wide and 8-inches in diameter and can be used on a variety of surfaces, including rocks, gravel, asphalt, uneven concrete and soft grass. They are also capable of 360-degree rotation.

Specific features of the wheels include a face locking pedal brake with an adjustable pad with a dual-lock mechanism, a round top plate and Matthews’ Spring Steel Sleeve for attaching the wheel to a stand.

Matthews offers the Rock n’ Roller wheels in three versions, the Monitor Wheel Set for Monitor Stand II and Slider Stands; the Combo Wheel Set for Combo Stands or any stand with a 1-inch square tube leg; and the Mombo Combo Set that works with stands with 1.5-inch square tube legs.

More information is available from Matthews Studio Equipment.