The European Space Agency's Galileo satellite navigation system reached another milestone this week when testing showed that the first of two Galileo satellites launched in October was in good health. Last weekend signals in three bands (designated E1, E5 and E6) were turned on for the first time. The signals were received by Galileo test user receivers deployed at ESA's ground station in Redu, Belgium and also at ESA's Navigation Laboratory in ESA's ESTEC technical center in Noordwijk, Netherlands.
The ESA release First Galileo Satellite producing full spectrum of signals said, "These test receivers work in the same way as operational receivers will once Galileo begins its initial services in 2014. They are capable of processing the Open Service, Commercial Service and Safety-of-Life Service signals from the Galileo constellation."
The release also noted that Galileo "combines multi-frequency signals with the most accurate atomic clock ever flown in space for navigation, accurate to one second in three million years. Its signals should open up a large number of commercial applications by combining this accuracy with the increased reliability of dual- or triple-frequency measurements."
GPS World has an excellent article on reception of the first signals at the University of Calgary – E1 and E5 Galileo IOV Signals: Reports from U. Calgary. It includes screen shots of data from the satellite and spectrum displays as while as pictures of the equipment used.
NIST Uses Light Waves to Transmit Ultra-precise Time Signals
NIST offers timing signals via RF at frequencies ranging from 60 kHz to 20 MHz