12.03.2008 03:59 PM
Nucomm launches ProQ DTV IFB Receiver

The new Nucomm ProQ DTV IFB receiver is designed for ENG IFB applications that rely on DTV transmission, monitoring DTV signals through a DVB-ASI output and streaming video over an IP connection to a laptop or other IP-enabled device.

The ProQ DTV IFB receiver features dual UHF/VHF antennas, two advanced silicon tuners and sixth-generation VSB demodulators. The ProQ is 5in x 1.75in x 8.5in.

The ProQ contains an MPEG Layer 1/Layer 2 audio decoder that is capable of decoding two independent sound programs, providing up to four audio channels and using bit rates as low as 32Kb/s for each. Coupled with a low-latency audio encoder and properly designed DTV packet insertion, total audio latency can be less than 80ms. Audio output is via a five-pin XLR connector.

Broadcasters can select the DTV channel and audio program PIDs to use via the menus on the front-panel LCD display or the Web interface. The interface can also be used to map the IFB audio channels to the XLR outputs, internal speakers or headphones.

For more information, visit www.nucomm.com.



Comments
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found




Thursday 10:05 AM
NAB Requests Expedited Review of Spectrum Auction Lawsuit
“Broadcasters assigned to new channels following the auction could be forced to accept reductions in their coverage area and population served, with no practical remedy.” ~NAB


 
Featured Articles
Research & Standards
Discover TV Technology