05.04.2006 01:11 PM
Iconix unveils HD POV camera, controller

At NAB2006, Iconix unveiled its new 2.3oz HD-RH1 high-definition point-of-view camera head and camera control unit.

The multiformat HD camera supports 720p at 24Hz, 25Hz, 30Hz, 50Hz and 60Hz; 1080i at 50Hz and 60Hz; and 1080p at 24Hz, 25Hz, 30Hz, 50Hz and 60Hz. The camera uses three 1/3in 16:9 CCDs and 14-bit quantization to deliver a sensitivity of F8 at 2000 lux. Signal to noise is less than 60dB. The camera offers programmable gamma function. It is genlockable and can be remotely controlled.

Outputs include RGB/YPbPr and HD-SDI. Two single link 4:2:2 or dual link 4:4:4 or dual link 4:2:2 outputs are available. Inputs include gunlock, tri-level sync, RS-232 and DSUB-9.

The camera control unit weighs 2.6lbs and is 8.4in wide, 1.78in high, and 12in deep. It can be positioned up to 30ft from the camera head.

For more information visit www.iconixvideo.com.

Back to the top




Comments
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found




Thursday 10:05 AM
NAB Requests Expedited Review of Spectrum Auction Lawsuit
“Broadcasters assigned to new channels following the auction could be forced to accept reductions in their coverage area and population served, with no practical remedy.” ~NAB


 
Featured Articles
Conference Updates
Discover TV Technology