LOUISVILLE, KY.—Every year, we cover
the Kentucky Derby horse race with all
the fanfare you’d expect of a television operation
serving this community. However,
this year, we converted our two stations
to high-definition operation, running our
own version of the Kentucky Derby as
we raced against time to be ready for the
Kentucky Derby and the May book that
followed.
We were on the fast track, with conversion
expected to take place within four
months—from start to finish. Part of this
facility buildout included a new audio
console. Our consultant had suggested a
Wheatstone D-8 control surface for live
news, and I immediately felt comfortable
in making that purchase as I’d worked
with a Wheatstone product at a previous
station and knew it to be very reliable and
a good performer. The D-8 digital control
surface had everything we needed for live
audio mixing with 48 input channels, four
submasters, two main buses and two aux
buses, plus extensive onboard processing.
AUDIO GOES FIRST
We ordered a 24-channel model to replace
an existing analog console and easily
had it set up and operational before
moving on to larger tasks in our move to
high definition.
The D-8 is seeing a lot of use here. We
average seven hours of news a day and
it’s typical for us to run eight mics at any
given time. For example, we’ll air one reporter,
follow him or her with two more
reporters and then do a final live shot. We
run audio from three microwave links
into the console, along with a satellite
feed, and a streaming box. We’re able to
bring in all live resources directly to the
console now.
MIX-MINUS IS A BREEZE
What I liked about the older Wheatstone
TV-6 I’d worked with—and now this
one—is that mix-minus is so easy. We didn’t
have mix-minus on our older analog console
here, so we had to cheat and use the
aux buses. With the Wheatstone D-8, mix
minus is easy. You see it, touch it, and it’s
out of the mix. This really comes in handy
when we have multiple live shots. Also
when we need to change sources, we can
dial up the source manually and bring it to
any fader. Previously, there were limitations
on what you could put on a given fader.,
now we can put any source anywhere. This
means that if an operator wants to run
mics in the middle of the board, he or she
can save the setup and recall it later.
The new Wheatstone D-8 allowed us
to complete our conversion on time with
very little in the way of problems. The
only real issue we had was with audio levels,
and as it turned out, this wasn’t a problem
with the console at all. After speaking
with a Wheatstone field engineer we
had the problem resolved in just a few
minutes—it turned out to be in the audio
embedding process. Overall, we’ve have
a very good experience with our D-8 console
and the move to digital audio.
David Callan is director of production
at Louisville’s WDRB and WMYO
television. He may be contacted at dcallan@wdrb.com.
For additional information, contact
Wheatstone at 252-638-7000 or visit
www.wheatstone.com.