07.16.2012 12:30 PM
Wohler to show new additions to DVM MPEG video monitors

Following the recent release of the DVM-2443 MPEG/ASI/IP monitor with four 4.3in screens, Wohler will also be showcasing three new additions to the DVM family of video monitors at IBC2012.

This includes the new DVM-5210, a 5-RU system with two 10in screens; the DVM-4290, a 4-RU system with two 9in screens; and the DVM-3270, a 3-RU system with two 7in screens. All of the DVM MPEG monitors provide convenient at-a-glance monitoring of program content from 3G/HD/SD-SDI inputs and MPEG-2/4 ASI and Ethernet IP streams.

The DVM broadcast-quality video monitors decode and display MPEG-2 and MPEG-4 signals via BNC or Ethernet inputs while giving users the ability to browse the PAT, PMT, and PID tables for each selected stream. In addition to MPEG ASI and dual-input 3G/HD/SD-SDI with loop-through, the DVM monitors also accommodate HDMI video and audio with level meters, GPI, and tally. Each monitor is capable of displaying in-picture audio level metering, video waveform, and vectorscope with classic CRT-style image calibration controls.



Comments
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found




Thursday 10:05 AM
NAB Requests Expedited Review of Spectrum Auction Lawsuit
“Broadcasters assigned to new channels following the auction could be forced to accept reductions in their coverage area and population served, with no practical remedy.” ~NAB


 
Featured Articles
Research & Standards
Discover TV Technology