Deborah D. McAdams /
10.24.2012 10:17 AM
SMPTE Sampling: File-Based Workflows
Dispatches from the 2012 Technology Conference
HOLLYWOOD: Optimal storage configurations, enterprise IP multicasting and making more money with BFX were a few of the topics covered during the opening day of the 2012 Society of Motion Picture and Television Engineers Technical Conference in Hollywood last month. TV Technology provides an overview.

Performance Parameters for Storage
Karl Paulsen*, chief technologist of Diversified System talked storage and what to consider when scaling it. A large, enterprise-level storage system is much more than a bigger version of the average email  server, he said, although many are being built of similar components. Larger systems are more likely to have to bridge other platforms, accommodate more peripherals and support multiple clients and associated workflows. Size, itself, is another matter as well.  Paulsen favors RAIDs versus larger capacity drives. RAIDs-redundant arrays of independent disks—are scalable in smaller steps and have higher fault tolerance. E.g., with a RAID of four 150 GB disks, all is not lost when one fails, compared to the loss of a 1 TB disk.

When designing a storage system, Paulsen recommended doing so with long-term uses in mind. Considerations should include overhead—things like RAID level, compression format, and encoder type; performance, such as what processes affect file-transfer speeds; the multiple workflow processes, core servers and databases supported; and many others.  All these factors need to be managed for the greatest efficiency to assure peak performance. Paulsen suggested a hierarchical storage management policy for moving aging files to other platforms, and deduplicating data as much as possible.

Optimized IP Multicast
Thomas Kernen, a consulting systems engineer for Cisco, presented a case for use of enterprise IP multicasting. He noted that services as diverse as AT&T’s U-verse and high-frequency stock trading rely on IP multicasting.

The basic premise of multicasting is one copy for many receivers. Content is replicated by network elements such as switches or routers. The payload is irrelevant, Kernen said.

When multicasting was first designed, it used an any-source architecture that required a shared tree set-up and a rendezvous point. The receiver sought out the desired stream, rather than its source, which required mapping. Source-specific multicasting, or SSM,  resolves this by pointing the receiver to the source. SSM was standardized in 2006.  Kernen said that with SSM and other IP multicast improvements, 4K and even 8K workflows can be accommodated over private networks.

BXF and Swapping Spots
Chris Lennon, chief technology officer of Harris Corp., said last-minute scheduling changes used to be the exception rather than the rule at TV stations. Now, he said, “people expect to be able to change things at the last minute and do it in a fairly simple and automated way.”

Lennon used the last-minute spot swap to highlight applications of the Broadcast Exchange Format, or BXF, developed under a SMPTE Working Group he chaired. BXF is basically a file wrapper for video-related data sets, published by SMPTE April 1, 2008, and now in use in several thousand operations. Lennon summarized the impact of BXF implementation on ad scheduling at two TV operations.

The first involved a public broadcaster, where the staff oversaw master control, monitors, seven radio and five TV stations, three studio interconnects and automation. The chief technology officer wanted a system where data was entered one time only.

Before BXF, the programming department entered the data into a scheduling system, while traffic and scheduling sent the record lists and dub lists to automation. More data may have been added at automation and at ingest. Each manual process introduced delay and cost, Lennon said. BXF allowed those disparate entries to be consolidated.

The second operation, a commercial TV station group, replaced a Post-It note system with BXF live update functionality. The transition took station personnel “out of their comfort level,” because they were used to the reliability of information they could lay their hands on. The smallest station was outfitted first, to work the kinks out. Ultimately, the use of BXF allowed the stations to change commercials on the fly and to reduced the turn-around time to reschedule pre-empted spots.

The ability to make those changes so much faster allowed the stations to do it for smaller incremental revenue gains than it would have considered previously with the Post-It system. Revenue at the smaller station rose by $1,500 a week. The largest station estimated its gain at $5,000 to $7,000 a week. In one log, the station replaced $6,000 in spots with $14,000 in spots, Lennon said.

In addition to streamlining the traffic and scheduling operation, BXF has other uses, Lennon said.

“Something unique about the BXF standard is that most standards are meant to be consumed by machines, and so is BXF, but it’s also supposed to be readable by humans,” he said. “BXF can hold the key to workflow obstructions and corruptions.”

BXF 2.0, published in July, is backward compatible with Vers. 1, and features such a live window that can show what just aired, what’s about to air and what’s on a the moment. It allows re-sued of house numbers, and programming of secondary events. BXF 2.0 also adds support of multiple languages.

BXF 3.0 will add automated agency copy instructions, when and where secondary events can be placed; active format description and audio information, he said.

~ Deborah D. McAdams

(*Karl Paulsen is a regular contributor to TV Technology whose ongoing column on media servers and storage is available here.)


 



Comments
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found




Thursday 10:05 AM
NAB Requests Expedited Review of Spectrum Auction Lawsuit
“Broadcasters assigned to new channels following the auction could be forced to accept reductions in their coverage area and population served, with no practical remedy.” ~NAB


 
Featured Articles
Research & Standards
Discover TV Technology