08.07.2005 08:00 AM
Kramer offers new DVI distribution amplifier

Kramer Electronics has introduced its VM-4DVI 1:4 distribution amplifier for DVI signals. The VM-4DVI allows users to select which attached display is the most significant and set the VM-4DVI to read, store and recall the Extended Display Identification Data (EDID).

EDID is the information that DVI displays send to the PC to identify its parameters. An EDID handshake upon power up is required in any DVI system or the PC will not send out a signal.

The Kramer VM-4DVI 1:4 DA, which comes in a 1RU enclosure and has a 120/220V worldwide power supply, accepts one DVI input and will reclock the signal and distribute it to four identical outputs. It will also process the EDID information sent over the Data Display Channel (DDC).

The VM-4DVI includes front panel buttons coupled with LEDs that allow users to select the most significant display in their system and to read and store that display’s EDID information.

For more information, visit www.kramerelectronics.com.

Back to the top




Comments
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found




Thursday 10:05 AM
NAB Requests Expedited Review of Spectrum Auction Lawsuit
“Broadcasters assigned to new channels following the auction could be forced to accept reductions in their coverage area and population served, with no practical remedy.” ~NAB

Wall Street Communications /   Friday 06:11 PM
Primestream Products on Display at CAPER 2014:
Wall Street Communications /   Friday 04:13 PM
Wohler Products at CCW 2014

 
Featured Articles
Exhibitions & Events
Discover TV Technology