12.12.2005 03:08 PM
MRC remote controls CodeRunner 2 transmitter

The Microwave Radio Communications Tx CodeRunner 2 remote lets an operator control the CodeRunner 2 transmitter functions using a remote control panel and display.

The control panel allows operators to select antennas, transmit channel or offset, power output or switch between analog or digital mode.

The control panel and display are designed for ease of use and optimal viewing. Six well-spaced pushbuttons make it easy to change settings even when wearing gloves. In addition, the buttons are backlit with controls to allow the operator to adjust the intensity of the display manually or in automatic mode.

The control panel connects to the CodeRunner 2 transmitter using a standard serial interface requiring a minimum of a three-wire harness. Power can be connected to the control panel from either the CodeRunner 2 transmitter or from a standard power bus.

For more information, visit www.mrcbroadcast.com.

Back to the top

Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found

Tuesday 03:07 PM
WMUR-TV Says FAA Drone Rules Preclude ENG
The FAA’s current rules and proposed ban on flight over people, requirement of visual line of sight and restriction on nighttime flying, effectively prohibit broadcasters from using UAS for newsgathering. ~ WMUR-TV General Manager Jeff Bartlett

Featured Articles
Discover TV Technology