06.14.2006 08:00 AM
Morrow rolls out VC70/800B

The new Morrow ENG Spectrum Monitoring System VC70/800B allows users to monitor signal level, interference and distortion of the current channel and activity on adjacent channels even before the digital link is established.

It offers two user interfaces. A simple interface makes it easy for the ENG operator to tune in a shot quickly; a second interface provides a full-featured spectrum analyzer with all the tools needed by an engineer to diagnose problems.

The unit allows multiple users to log on at any location with LAN or Internet access. This lets engineers and ENG operators access a spectrum monitor simultaneously — enabling collaboration for quick problem resolution.

The VC70/800B has separate input connectors for both the 800MHz and 70MHz IF outputs on the central receiver. The user interface lets users switch from one input to the other. The 800MHz input lets users see the current channel, as well as the upper and lower adjacent channels. The 70MHz input lets users monitor the signal that is presented to their COFDM decoder.

For more information, visit www.morrowcorp.com.

Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found

Thursday 10:05 AM
NAB Requests Expedited Review of Spectrum Auction Lawsuit
“Broadcasters assigned to new channels following the auction could be forced to accept reductions in their coverage area and population served, with no practical remedy.” ~NAB

202 Communications /   Friday 12:41 PM
Albis Technologies Appoints New Head of Access Solutions
ignite strategic communications /   Thursday 03:48 PM
2015 HPA Tech Retreat(r) Unveils Expanded Session Schedule

Featured Articles
Discover TV Technology