01.12.2012 03:47 PM
JVC develops handheld 4K camcorder

JVC Professional Products Company (pro.jvc.com) has announced a handheld 4K camera for under $5000, which should bring high-resolution acquisition within reach of a broader community of productions.

After conducting a number of 4K forums throughout North America last year, JVC has used that feedback to develop a 4K and HD imaging system that feels like a traditional video camera that can be easily handheld. In fact, it's similar in size to JVC's GY-HM150 ProHD camcorder.

Using MPEG-4 technology and a variable bit rate H.264 codec operating at up to 144Mb/s, the GY-HMQ10 records up to two hours of 4K video to standard SDHC or SDXC memory cards. In addition to 4K imaging, the camcorder also captures and records 1080i or 1080/60p HD images on a single memory card that's ready for file-based editing.

The new camcorder — available in March — captures, records and plays video images at four times the resolution of HD (1080p60) with the company's Falconbrid large-scale integration (LSI) chip on 1/2in CMOS imager. It facilitates high-speed signal processing with 8.3 million active pixels, and, according to the company, delivers real-time 3840 x 2160 footage at 24p, 50p or 60p.

High-resolution still picture imaging has been possible in DSLR cameras, however, full motion video capture with these cameras has always been done at a lower video resolution because of a lack of processing power. Likewise, he said, high-end digital motion picture cameras may capture 4K images, but often provide a raw data output to an external storage array for later processing (again, due to inadequate processing power inside the camera).

JVC's exclusive Falconbrid LSI processing solves this problem by taking raw image data from the camera's CMOS device and dematrixing ("de-Bayering") it in real time. Unlike existing 4K cameras, the GY-HMQ10 is able to output these high-resolution images to a monitor or projection system in real time with virtually no latency.

One feature requested by customers was the ability to crop an HD image from a 4K frame. This can be accomplished in post production or in real time during camera playback. A built-in "trimming" feature makes HD cropping easy using the camera's touch panel LCD monitor.

The GY-HMQ10 includes a built-in f/2.8 10x zoom lens with optical image stabilizer, as well as a color viewfinder and 3.5in touch LCD monitor with a new, intuitive user interface. The GY-HMQ10 is built in a familiar, comfortable and lightweight form factor for hours of field production with minimum fatigue. The camera is includes manual level controls for audio, with audio metering in the LCD and viewfinder displays. A microphone holder and two balanced XLR connectors with phantom power are located on the handle. The camera is also equipped with a built-in stereo mic for ambient sound pickup.

Other features include JVC's patented Focus Assist, as well as manual and auto control of focus, iris, gain, shutter, gamma, color matrix, and white balance. In addition, the camera has the unusual capability of live 4K output via four HDMI terminals.



Comments
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found




Thursday 10:05 AM
NAB Requests Expedited Review of Spectrum Auction Lawsuit
“Broadcasters assigned to new channels following the auction could be forced to accept reductions in their coverage area and population served, with no practical remedy.” ~NAB


 
Featured Articles
News Technology
News Technology
Discover TV Technology