05.12.2008 11:21 AM
Leader debuts MPEG-2 decoder

Leader Electronics has introduced a new decoder module for its LV5800 modular multimonitor platform that allows MPEG-2 compressed DVB-ASI signals to be decoded and displayed as a video waveform, video vector or monitor image.

With the new option, the LV5800 can decode HD 1080i and 720p signals at 50Hz, 59.94Hz and 60Hz as well as SD at 480i/59.94 and 576i/50. It can also display transport stream bit rate, ETSI ETR-290-compatible errors, program information, program association table and program map table.

When operated in conjunction with Leader’s LV58SER40 digital audio module, the new decoder module allows MPEG-2 ACC, Dolby Digital (AC3) and MPEG-1 audio extraction and channel monitoring with signal level and lissajous waveform display.

The LV5800 platform enables up to eight SD-SDI or HD-SDI sources to be monitored and up to four channels to be displayed simultaneously for level, rise time, fall time and jitter. Signal feeds can be monitored autonomously, producing an error log with alarm whenever operator-definable thresholds are violated.

The LV5800 platform and the new decoder module are available from elQuip BV (www.elquip.com), the broadcast master distributor for Leader Electronics in Europe.



Comments
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found




Thursday 10:05 AM
NAB Requests Expedited Review of Spectrum Auction Lawsuit
“Broadcasters assigned to new channels following the auction could be forced to accept reductions in their coverage area and population served, with no practical remedy.” ~NAB


 
Featured Articles
Research & Standards
Discover TV Technology