Apantac Launching VoIP Multiviewers at IBC 2017
Si-16 series to address monitoring video and audio over an IP network infrastructure
September 12, 2017
PORTLAND, ORE.—Apantac is preparing its new video over IP multiviwers for display at the upcoming IBC 2017 show.
The new Si-16 series of multiviewers from Apantac are designed for monitoring video and audio over an IP network infrastructure. Apantac will demonstrate the Si-16’s ability to support the ST 2022-6 standard for encapsulated SDI over IP. Apantac expects that the multiviewers will also be able to support the ST 2022-7 standard, as well as the ST 2110 video over IP standard. The Si-16 multiviwers accept 16 VoIP inputs using SFP modules. The connection between the IP Switch and the Si-16 is done via fiber.
Apantac has three models for Si-16 multiviewers, all of which share the same 1RU hardware. The Si-16 is a 16x1 multiviewer with a dual set of identical HDMI and SDI outputs. The Si-16+ consists of two 8x1 multiviewers where the output from each is available as both HDMI and SDI. And the Si-16# is a 16x2 multiviwer with two sets of HDMI and SDI outputs, where any input can be displayed on one or both outputs.
Apantac is also expected to feature a new VoIP input board for its modular T# multiviewer series accepting up to eight ST 2022-6 signals.
Apantac will be located at booth 8.E37 during IBC 2017.