The first time a new acquisition format
appears at the NAB Show, it
draws a crowd of curious onlookers.
By the time test and measurement equipment
manufacturers release products for
the new format, the curiosity stage has
been replaced by real-world production in
the new higher level.
This year it was obvious that 4K had
arrived—several manufacturers displayed
4K-capable test and measurement gear.
Of course, there was a wide variety of
test and measurement products for every
other professional television application,
Blackmagic Design debuted the Smart-
Scope Duo featuring dual eight-inch LCD
screens in a compact rackmount design
that’s less than an inch thick. It provides
independent monitoring of
picture video and technical
monitoring between the two
DekTek Digital Video unveiled
the DTU-351, a USB3 device
that accepts an HD-SDI signal
for recording on a PC. When
used in conjunction with the
supplied SdEye software, it
displays video waveforms and
audio signal level information.
|Pete Fraser (L) of Phabrix makes a point about the company’s Rx2000 rasterizer to Omarr Alharazim of Infinite Conferencing.
Hamlet introduced the Digi-
Tek DT900 waveform/vectorscope
with an LCD display and
a built-in rasterizer, and audio monitoring
functionality. The 1RU device supports 3GSDI,
HD-SDI, and 16 channels of analog or
Harris/Videotek rolled out the DL-870 legalizer
for HD, SD and RGB. It can be optionally
linked to a second channel for
Leader announced the LV5490 waveform
monitor with 4K capability and a nineinch
display. It displays waveforms for
any signal from 525-line SD to 4096 x
2160-pixel 4K, as well as serving as a picture
monitor and focus-assist display.
Phabrix upgraded its rackmount Rx1000
and Rx2000 rasterizer line, adding ITU
1772 and EBU loudness support, LTC and
VITC timecode view, CEA-608/708 closed
caption support, Dolby E/D/D+ generation
and analysis, 2K file formats and an
enhanced waveform presentation.
Tektronix unveiled the WFM5250 waveform
monitor with an HDMI connection,
which makes it ideal for checking the
HDMI output of cameras and Blu-ray players.
The WFM5250 (and the similar rasterizer
version, the WVR5250) can confirm
that the output of HDMI devices meet industry
Bridge Technologies debuted the Pocket-
Pro, which analyzes data at a receive point
and sends information back to the headend
via an IP link.
Broadpeak highlighted its BkA100 video
delivery analytics, a system that gathers a
network’s raw data in a variety of formats,
then enables access to the data to analyze
patterns of use, quality of service and other
parameters. Data is displayed as dashboards
and graphs in a GUI, which can be
exported in a range of formats for reports
|Rich Miller (L) from Vislink Broadcast explains his requirements for the Nevion TNS-460 HD/SD-SDI monitor to Inge Hillestad of Nevion.
Cobalt Digital showed new features for
its SpotCheck series of transport stream
compliance monitors, including the Spot-
Check-5000 that performs compliance
monitoring on up to 1024 streams. It measures,
records and logs audio loudness
and can work with IP, ASI or off-air MPEG
Digital Nirvana unveiled AnyStream IQ, a
cloud-based system for streamed media
monitoring. It records, logs and monitors
live and recorded streamed broadcasts for
Web captioning compliance and proof of
DVEO showed its handheld Probium QAM
digital signal analyzer that monitors QAM
and DVB-C parameters including MER,
BER, average power and pre/post FEC.
IneoQuest introduced new features for its
DVA IP quality of service monitor, which
now supports 10 Gbps Ethernet. The company
also showed the IQDialogue ASM 3.0
monitor with active monitoring for up to
|Peter Lampel (L) of Rohde & Schwarz explains the operation of the company’s EFL-110 RF Analyzer & leakage detector to Greg Ellis of Dacast.
Nevion featured its TNS460 HD/SD-SDI
monitor for central head-end monitoring.
It tracks signals on temporary contribution
feeds and may be placed at a signal
hand-off point to
confirm that everything
is clean before
it’s handed off to the
the DVStor2 Consolidator
logging system that
locates, marks and extracts
an entire program in either reduced
or full resolution.
Snell displayed its Roll family of control
and monitoring products, including Roll-
Map, a system that monitors Snell’s products
for signal flow both locally and remotely.
TeamCast debuted Odyssey, which confirms
operation of set-top boxes and
receivers. It measures typical RF performance
data including input level, MER,
SNR, CNR, BER and PER.
Triveni Digital demonstrated its Stream-
Scope MT-40 and RM-40 DTV transport
stream analysis and monitoring. The MT-
40 provides end-to-end MPEG-2/MPEG-4
transport stream analysis and monitoring
and the RM-40 focuses on quality-of-service
Video Clarity announced the RTM 3G, a realtime
monitor/recorder that analyzes 1080p
video in uncompressed 3G format, and
provides long-term monitoring to detect
subtle errors. Also new was the ClearView
Extreme 4K video quality analyzer for testing
4K encode/decode degradation.
Volicon showcased v7.1 of its Observer TS
MPEG transport stream logging and monitoring
system, now with loudness measurement
and digital program insertion
Coaxial Dynamics highlighted
its model 81041
USB Wattmeter, which has a
standard analog meter on its
face and a USB port for computer
|Barb Perrion of Sencore shows off the company’s DSA1490 signal analyzer.
Promax featured the TV Explorer
HD analyzer, which is
used to prove a broadcaster’s
signal coverage. Paired
with a GPS device, the TV
Explorer HD acquires signal
from a moving vehicle and
exports the data to a GIS
Rohde & Schwarz debuted
the EFL110 portable TV test
receiver that sniffs out RF leakage and
stray emissions. When coupled with R&S’s
new directional VHF/UHF antenna, it can
quickly locate interfering signals
and leaking connections
and provides a spectrum display
on a built-in.
Sencore spotlighted its DSA1490
and related DSA1490-ASI signal
analyzers. These analyze 8-VSB,
QAM, digital satellite signals and
ASI MPEG streams, providing
measurement of MER, BER, PER,
|James Zajicek (R) of Evangelical Lutheran Good Samaritan discusses a feature of the Z Technology MeterMate Pro with John Purdy of Z Technology.
showed its Goldeneagle ATSC
for monitoring up to 40 digital
channels for RF, transport
stream errors, MER and PSIP
data. There are similar versions
for DVB-T and DVB-T2.
Z Technology unveiled the MeterMatePro
for its R-506 and R-507 field
strength meters. Using Meter-
MatePro with a computer and a
GPS unit, it supports automated
signal strength measurements for up to 15
frequencies. Data can be moved into a GIS
mapping service and Google Earth.