posted by Bob Kovacs /
08.26.2014 03:06 PM
ESE Rolls Out Master Clock System Switcher
Maintain timing in the event of primary system failure
ESE ES-150U master clock switcher

El Segundo, CA — ESE recently announced the introduction of its ES-150U master clock switcher. Master clock switchers are typically used with a primary master clock (“A”) and a secondary master clock (“B”). A master clock switchers provides a convenient way of switching to the secondary master clock if a problem develops with the primary unit. The master clock switcher monitors one or more of the “A” inputs and, when a fault is detected, it switches all the outputs from A to B.

The ES-150U monitors ESE and SMPTE/EBU time codes. Four front-panel LEDs light to indicate when valid time code is provided. The ES-150U is available with option DPS, which provides dual power supplies to keep the unit running in the event the primary power supply fails. Another convenient option on the ES-150U is IP connectivity with the NET feature, which allows the user to control and monitor the status of the ES-150U via a standard web browser.

The ES-150U is now available and ready to ship.



Comments
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found




Thursday 10:05 AM
NAB Requests Expedited Review of Spectrum Auction Lawsuit
“Broadcasters assigned to new channels following the auction could be forced to accept reductions in their coverage area and population served, with no practical remedy.” ~NAB


 
Featured Articles
Discover TV Technology