03.31.2010 12:35 PM
Digital Alert Systems to Highlight DASDEC-II IP-Based EAS

Digital Alert Systems, a division of Monroe Electronics, will introduce DASDEC-II, an IP-based, Common Alerting Protocol-compatible EAS encoder/decoder set at the NAB Show.

Ready to go straight from the box, DASDEC-II can be used as a drop-in replacement for existing EAS encoder/decoder sets. DASDEC-II supports a broad range of physical connection and interface protocols—including simple GPI/O, serial, USB, and IP networking. DASDEC-II has a nonvolatile memory bank and automatically logs FCC alert compliance.

DASDEC-II’s MPEG encoder option allows it to encode emergency alert video and audio into MPEG-1, MPEG-2, or MPEG-4 streams for Ethernet output. This feature simplifies alert management by allowing broadcasters to distribute and deploy emergency alerts in the specific format already in use by the station, without the need for additional encoding equipment.

Broadcasters also can select the EXP-3NIC option, which provides an additional three 10/100 or 10/100/1000 Ethernet connections for a total of four ports that provide multiple access points within a station.

Digital Alert Systems will be at Booth C3651.

Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found

Tuesday 03:07 PM
WMUR-TV Says FAA Drone Rules Preclude ENG
The FAA’s current rules and proposed ban on flight over people, requirement of visual line of sight and restriction on nighttime flying, effectively prohibit broadcasters from using UAS for newsgathering. ~ WMUR-TV General Manager Jeff Bartlett

D. Pagan Communications /   Friday 10:35 AM
Blue Line is Hot on the Trail of DPA Microphones
Clyne Media, Inc /   Thursday 09:51 PM
Focusrite Expands RedNet Range

Featured Articles
Discover TV Technology