Rich Byrnes, Assistant Production Manager, WKMG-TV / User Report
10.14.2013 03:00 AM
Vinten Rademac Is Solid Performer at WKMG-TV
Rich Byrnes
ORLANDO, FLA.—Back in 2004, we installed three Vinten (now Vinten Radamec) SP-2000 robotic pedestals mounted with AutoCam HS-2010 Series robotic pan-and-tilt heads. We also installed an AutoCam HS- 105P robotic pan-and-tilt head mounted on a manual pedestal. All four cameras are operated fully robotically. 

When we were evaluating robotic cameras 10 years ago, what put the Vinten AutoCam system over the top was that it allowed us to have separate control points. If one pedestal failed, the rest of the system could continue operating.

Originally we hooked the ACS200 Series controller to our Sony ELC automation system and let the Sony package operate our robotic cameras. However, we preferred to incorporate on-air camera moves, such as zooms or trucks, and now assign a robotics operator for each of our newscasts.

Learning to run the Vinten Radamec system turned out to be very easy for new operators. I like to compare learning to operate our robotic cameras to learning chess—you need to know when you can move a specific camera, and what direction it can safely travel in.

We normally give a new trainee a full week of training with someone looking over their shoulder. The biggest challenge is getting them to think and run the system as though they were actually standing behind the cameras. Pedestal collisions do happen occasionally, and operators need to know how to recover quickly from a bumper hit.

We don’t have a “super user” per se; any one of our operators can create and save a new shot to the system. When a new shot or move is requested, the operator on duty will program it and rehearse it, if possible.

For camera moves, we set the shot at both ends of the move and let the control system itself interpret the move between points A and B. We don’t use the “motion” feature, as it takes too long to use on our timetable.

Since the robotics were installed, we’ve used them every day for both morning and afternoon slots. Even with a two-hour news block in the morning, our operators target the pedestals and make sure everything’s running properly, then we leave them in that mode for the next two hours.

We don’t do as many on-air camera moves in the morning as we do in our other newscasts; however, we usually open with a little pedestal move—or a zoom— and some little left-to-right trucks during the show. Our viewers have told us they like seeing these moves.

We initially used heavy studio-style Ikegami cameras with box lenses, but about a year ago these were replaced with Ikegami ENG-style cameras and lenses. Except for the need to add some weight at the rear of the cameras to counterbalance our prompters, everything continues to work the same as with the smaller cameras, just like it has ever since we first installed the system.

Rich Byrnes is the assistant production manager at WKMG-TV. He may be contacted at

For more information, contact Vinten Radamec at 203-929-1100 or visit

Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found

Tuesday 03:07 PM
WMUR-TV Says FAA Drone Rules Preclude ENG
The FAA’s current rules and proposed ban on flight over people, requirement of visual line of sight and restriction on nighttime flying, effectively prohibit broadcasters from using UAS for newsgathering. ~ WMUR-TV General Manager Jeff Bartlett

Zazil Media Group /   Thursday 11:51 AM
Orad Presents 3D Pre-Visualization at NAB Booth SL6317
Wall Street Communications /   Thursday 03:53 PM
Digigram Marks 30 Years of Innovation With Launch of New Visual Identity

Featured Articles
Discover TV Technology