Doug Lung / RF Report
03.10.2014 08:14 AM
Laser Light and Nanomembrane Used to Detect RF
Room-temp device emulates conventional detector operation at -271 C

The idea of using a particle or object's motion to detect RF isn't new, the first radio receivers used a coherer to detect radio waves. Metal filings completed a circuit when RF was present. A small tapper then broke the circuit, allowing Morse code signals to be demodulated. Eugene Polzik, professor and head of the research center Quantop at the Niels Bohr Institute at the University of Copenhagen, and his team have come up with a much more sensitive detector for RF using a laser beam and a nanomembrane capacitor.

The detector relies on optomechanics, a complex interaction between a mechanical movement and optical radiation. An antenna picks up the radio waves and transfers them to a nanomembrane capacitor which is in turn read by a laser beam. The nanomembrane is made of silicon nitrate and coated with a thin layer of aluminum and is encased in a vacuum chamber.

Polzik and his team found that this combination responds as if it had been cooled down to two degrees Kelvin, even though it operates at room temperature.

Research Assistant Professor Albert Schliesser, who coordinated the experiments, explained: "In our system, one metal plate in the capacitor is replaced by a 50-nanometer thick membrane [a nanometer is a millionth of a millimeter]. It is this nanomembrane that allows us to make ultrasensitive measurements without cooling the system."

The RF signal produces fluctuations in the membrane that are read optically using the laser beam. There are only three sources of noise: electrical noise in the antenna, mechanical thermal noise in the membrane, and the quantum noise of the light.

"This membrane is an extremely good oscillator and that is why it is so ultrasensitive," said Polzik. "At room temperature, it works as effectively as if it was cooled down to minus 271 C and we are working to get it even closer to minus 273 degrees C, which is the absolute minimum. In addition, it is a huge advantage to use optical detection, as instead of using ordinary copper wires to transmit the signal, you can use fiber optic cables, where there is no energy loss."

The  Niels Bohr Institute Press Release has more details on the experiment and potential uses of the technology.



Comments
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found




Thursday 10:05 AM
NAB Requests Expedited Review of Spectrum Auction Lawsuit
“Broadcasters assigned to new channels following the auction could be forced to accept reductions in their coverage area and population served, with no practical remedy.” ~NAB

Sue Sillitoe, White Noise PR /   Tuesday 10:20 AM
Visual Unity Strengthens Its Marketing Team
Brian Galante /   Tuesday 11:49 AM
TNDV Mobile Production Fleet Grows with Elevation

 
Featured Articles
Discover TV Technology