04.01.2011 01:00 PM
DP Praises Lowel Rifa eX Softlights

LOS ANGELES—I'm a DP who shoots a lot of documentaries, from interviews to B-roll. I usually work alone and need lightweight, convenient gear that can work in a variety of situations.

The Lowel Rifa 55 eXtra Flo 80 Kit
That's why I started using Lowel's Rifa eX softlights. For starters, they're very quick to work with because they open and close like an umbrella. I can literally have a Rifa out of its case and on a stand in about 90 seconds. Better yet, Lowel designed them to accept both tungsten and fluorescent daylight balanced lamps. You simply twist a different lamphead into the Rifa and it's ready to take one kind of lamp or the other. I have a Rifa eX 88 as a key light for interviews and such, as well as a Rifa 44 for occasional fill.

NEEDED MORE POWER

My only disappointment was the power of the daylight I could produce with the 27 Watt fluorescent lamps that came in my original Rifa kit. I use Lowel's FLO-X3 lamphead, which takes three of the fluorescent lamps at a time. Each 27 Watt lamp produces the rough equivalent of a 95 Watt incandescent bulb, so three of them deliver almost 300 Watts. Unfortunately, that's just not enough if I'm shooting in a bright room with plenty of window light. In those scenarios—which are pretty common—it provided a faint fill-light, when placed even a couple of feet away from my subject.

But that's all changed since Lowel began shipping new 80 Watt fluorescent lamps. By using three of these in my Rifa, I get the equivalent of about 800 Watts. Now we're talking.

I've had a chance to work with these lamps several times, and they definitely fulfill the Rifa's promise as a daylight source in a bright room. I still need to keep the light within a few feet of my subject for best results, but that's rarely a problem. When I need a little less light, the FLO-X3 lamphead lets me turn off each lamp individually.

The only hitch for some with the 80 Watts lamps may be their size. They're about 11 inches long and 2.6-inches in diameter. I couldn't squeeze three of them into the tube case I use to carry my Rifa 88, so as an alternative, I've been packing them into Lowel's type FLO-X63 protective plastic tubes, and then placing them in a small backpack (or occasionally squeezing them in with the rest of my lights). Lowel also sells a small hard case that accommodates four lamps together, their GO-85X product.

BEST FIXTURE FOR THE JOB

Size aside, these new 80 Watt fluorescents give me a reasonably strong source of daylight, along with the flexibility to go to tungsten anytime I'd like, up to 1,000 Watts. I could have gotten similar results with a bigger fixture, but my 32x32-inch Rifa eX 88 is lighter in weight, controls spill better (with an egg crate), and gives me both a bigger and softer light source. In my kind of work, the Rifa eX system really does give me the flexibility to handle almost any job.

Helmut Kobler is a Los Angeles-based documentary cameraman. He's also written three editions of "Final Cut Pro for Dummies." He may be contacted at helmut@lacameraman.com

For additional information, contact Lowel-Light Mfg. at 800-645-2522 or visit www.lowel.com.



Comments
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are
made, please login or register.

Enter the code shown above:

(Note: If you cannot read the numbers in the above
image, reload the page to generate a new one.)

No Comments Found




Thursday 10:05 AM
NAB Requests Expedited Review of Spectrum Auction Lawsuit
“Broadcasters assigned to new channels following the auction could be forced to accept reductions in their coverage area and population served, with no practical remedy.” ~NAB


 
Featured Articles
Discover TV Technology