Originally featured on BroadcastEngineering.com
9/25/2008 10:57 AM
Innovative New Range Of Microphone Suspension Products Makes Its Debut
Stroud, UK, September 2008: Rycote’s major launch in 2008 has been the complete range of InVision microphone suspensions, which dispense with the elasticated cradles traditionally used to reduce microphone handling noise, and can be seen at the Rycote stand during this year’s IBC show. Instead, the eight-strong InVision range is based around flexible but virtually unbreakable W-shaped clips, known as Lyres and available in several different sizes, which provide a more efficient isolation from unwanted vibrations than traditional suspensions. Lyres of varying diameters are then combined in the eight different models in the InVision range to provide suspension systems suitable for a wide range of microphones of different diameters and from different manufacturers. Models INV-1 to INV-3 are designed for smaller-bodied microphones in static use, while models INV 4-8 are designed for static and boom-mounted applications, and fit microphones ranging from 8 mm to 30 mm in diameter. INV-7 is designed for shockmounting both fixed and boom pole-mounted microphones, and can be used with a variety of microphones from 19 to 25 mm in diameter, including the Schoeps CMIT-5U, Audio-Technica AT4073a, Sennheiser ME66/K6, Neumann KMR81i, DPA 4017, and Beyerdynamic MCE86. A full list of microphones compatible with InVision can be found at www.rycote.com/products/invision.
To find out more about these new products, go to www.rycote.com, or visit the Rycote team in person at during IBC. A frequency response curve showing the efficacy of the InVision suspensions may be downloaded at homepage.mac.com/girth.tydfil/.Public/InVisionResponse.zip