Originally featured on BroadcastEngineering.com
5/16/2008 1:01 PM
LAS VEGAS, NEVADA, MAY 16, 2008—
Aviom, exclusive developer of the world’s most powerful audio transport protocol, A-Net®, is showcasing the latest addition to its innovative Pro64® Series of audio distribution products, the
6416m Mic Input Module
, at InfoComm 2008 (Booth C4175) along with companion products, the RCI Remote Control Interface and the MCS Mic Control Surface. Aviom’s newest products all target the installation, production, live performance, broadcast and post-production markets.
The 6416m delivers 16 state-of-the-art remote-controllable mic-level inputs to a Pro64 audio network. Each channel on the 6416m has a continuously variable gain setting, multi-segment signal level LEDs and individual channel on/off switches. The 6416m supports all valid Pro64 sample rates, from 44.1/48kHz± to 192kHz±. Because the system does not rely on sample rate converters, users are guaranteed pristine, low latency distribution of the digital signal regardless of the sample rate of incoming audio.
The 6416m can be remote controlled by adding the RCI Remote Control Interface and MCS Mic Control Surface. The 1-U RCI provides a network access point and monitor station and accepts the MCS Mic Control Surface, which is used to select and edit any active mic preamp channel anywhere in the network. Up to 64 channels of mic pres can be controlled remotely from a single MCS, or the Control Group function on the 6416m and RCI can be used to divide control among up to four different simultaneous users and control points.
The 3U-high 6416m Mic Input Module is compatible with all Aviom Pro64 digital audio network products and can be connected to analog or digital output modules, or to the 6416Y2 Yamaha® console card in any combination. MH10 and MH10f Merger Hubs can be added for bidirectional parallel connections on Cat-5 or single- or multi-mode fiber optics.
For more information visit www.aviom.com.