11/20/2009 1:53 AM
San Diego, CA – 3D Film Factory has released the first production-ready, cost-effective 3D camera system – the 3D-BS Pro Rig. This 3D beam-splitter rig was specifically designed for use with the Red One cameras, as well as, other larger, broadcast quality cameras. Its durable, precise configuration was developed with the guidance of veteran stereographers and award-winning filmmakers to provide a viable, affordable alternative to high-priced 3D rigs costing ten times as much.
“Up until now, there’s only a few high-end facilities offering 3D rigs for Red One cameras and they’re very expensive”, said company president Karl Kozak. “So we set out to create a quality 3D Red system most filmmakers could afford. We’re interested in proliferating 3D production by making it accessible. The result was the 3D-BS Pro Rig, a great 3D rig for the Reds, that shoots incredible 3D at a fraction of the cost.”
The company’s new 3D-BS (beam-splitter) Pro Rig allows users to manually adjust both the camera convergence settings (1° to 5°) and the inter-ocular (camera-to-camera) distances from 0” to 6”. It’s constructed of black anodized aluminum that’s virtually indestructible, with a weight of approximately 32 lbs. Its durable frame adjusts to fit almost any pair of large-sized, broadcast quality cameras, including but not limited to; Red One, Sony, Canon, Panasonic, Silicon Imaging and JVC.
At the center of the 3D rig is a piece of optically engineered, impurity-free, 50/50 beam-splitter glass, that’s been optimized for a 45° angle. It’s fully encased in a light-dampening, rugged plastic mirror box, that’s completely detachable and secure. The housing and glass positioning are easily modifiable to accommodate almost any large-size camera model and/or lens. Finally, the entire 3D rig readily attaches to most professional tripod heads with the use of a simple supplied adapter.
The result is an inexpensive, robust 3D rig that makes 3D shooting both simple and precise. When combined with a real-time 3D viewing system, a dual camera sync device and genlock, cinematographers can capture extraordinary 3D images for a fraction of the cost of all other systems.
“It’s really that easy to start shooting 3D images, you just need a few good tools and some training”, said Kozak. “Of course, to achieve superior 3D, you’ll need a stereographer. We use one on all of our 3D productions, because the cinematographer can’t do it all. As a result, we hire out professional stereographers for 3D training and 3D productions worldwide.”
In addition to the Red One camera, the 3D-BS (beam-splitter) Pro Rig is compatible with the following cameras; Sony’s CineAlta HD Cams, F950, F900, F35, HDW650, HDW790, DSR450, DVW970, Panasonics HDX900, HPX2000, HPX500, HPX3000, and the Varicam HDC27H, Ikegami’s HDK-79EXIII, HDK-727P, HDS-V10, HDK-79EC, HDN-X10, Silicon Imaging’s Si-2K, and many others.
Additionally, the 3D Film Factory offers a complete line of 3D rigs, including the 3D-BS (beam-splitter) Indie Rig, intended for smaller, professional grade camcorders, as well as, an assortment of inexpensive 3D-SS (side-by-side) Rigs. These dual cameras systems are less complex, but equally necessary for most 3D production situations.
To learn more about the 3D-BS Pro Rig or the full line of 3D rigs, visit the company’s website @ www.3DFilmFactory.com