2/13/2009 12:44 PM
Las Vegas, NV, February 12, 2009 – Nucomm, part of The Vitec Group’s RF Systems business unit, and a leading provider of digital and analog microwave systems for the broadcast industry, common carrier, cable, government, military and international marketplace, is redefining the strength of DTV signals and IP technology with its new ProQ DTV IFB receiver, which is new to NAB 2009 (Booth C3707). The ProQ DTV IFB receiver is ideal as an IFB solution for ENG users during DTV transmission, monitoring of DTV signals through a DVB-ASI output, and streaming video over an IP connection to a laptop or other IP-enabled device. It is 5” x 1.75” x 8.5 and features dual UHF/VHF antennas, two advanced silicon tuners and 6th generation VSB demodulators.
“Nucomm is always developing products to help bring more efficiency to broadcast production,” says RF Systems President Stephen Shpock. “Through our new ProQ DTV IFB receiver, users in the field can monitor the quality of DTV transmission and receive cueing signals from the studio. It also affords broadcasters the benefits of streaming DTV video over IP, which is becoming a new standard within today’s industry.”
The ProQ contains an MPEG Layer 1/Layer 2 audio decoder that is capable of decoding two independent sound programs, providing up to four audio channels and using bit rates as low as 32 kbps for each. Coupled with low-latency audio encoders and proper design of the DTV packet insertion, total audio latency can be less than 80 ms. Its audio signal outputs are outfitted on a 5-pin XLR connector.
Designed for easy and rapid user configuration, broadcasters can easily select the DTV channel and audio program PIDs using either the menus on the front panel LCD display or the Web interface. It can also map the IFB audio channels to either the XLR outputs, internal speaker or headphones. Status information, such as RF signal level/quality, DTV signal lock and audio levels, is available through ProQ DTV IFB receiver’s Web interface and is updated in real-time on the front panel LCD display.
In keeping with the industry’s rapid evolution in technology as well as audio compression and encapsulation standards, ProQ DTV IFB receiver’s firmware-based audio decoder is upgradable. As an IP-enabled device, it is strategically designed for advancement through the built-in Ethernet interface using a laptop computer and a Web browser.
The ProQ DTV IFB receiver began shipping in December. Nucomm is currently accepting orders for both the low latency studio mux and DIFB receiver. For more information about Nucomm and its new ProQ DTV IFB receiver, call 908-852-3700.
Nucomm is a worldwide provider of premier digital and analog video microwave systems (including COFDM and VSB) for the broadcasting industry’s portable and fixed link applications. Offering video microwave transmission equipment for the military, law enforcement, telecom and cable television circuits, Nucomm’s products have helped revolutionize live broadcast coverage of major outdoor events including sports, auto racing, marathons and parades. Nucomm, along with RF Central and Microwave Service Company, forms The Vitec Group RF Systems business unit, part of The Vitec Group Broadcast Systems Division. For more information about Nucomm, visit www.nucomm.com.
About The Vitec Group plc
The Vitec Group plc is acknowledged as a global leader in the supply of equipment and services to the broadcasting, entertainment and photographic industries and has established a reputation for technical excellence and superior engineering along with an astute business strategy which has seen it grow by acquisition. Innovation is a cornerstone of the Group’s activities and the organization is committed to a policy of continuous product development. With revenues (2007) of $546m (£274m) and over 2200 employees world-wide, its products are distributed in almost 100 countries, through a strong, fully-resourced distribution network or direct to the end user or corporate customer. More information can be found at www.vitecgroup.com.